RoadLED 50m
Page 9 / 20
Created
23.04.2021
rasa
Modified
06.10.2021
rasa
Object-ID
2214657
5. Function selection button/Pattern: The button is used to call stored functions. The following functions
have been implemented:
1. Continuous lighting
2. Blinking
3. Flashing
4. Running light from cable reel to cable end
5. Running light from cable end to cable reel
6. Running light from cable reel to cable end and back
6. One press of the button corresponds to one function. Pressing the button again starts a new function.
The battery capacity is displayed if the button is held down for more than 2 seconds.
7. Rotary controller for setting the speed of the running lights, blinking frequency and flash duration in 10
steps. The following speeds and frequencies are possible:
Blinking: 0.5 – 5Hz
Flashing: flash impuls from 10 – 100ms / Pause 800ms
Running light: 50 -150km/h
