4
DPT260
UK
3 - BOLLARD DATASHEET
Bollard
DPT280
Moving cylinder material
S235JR steel
X5CrNi18-10 stainless steel (AISI 304)
X5CrNiMo17-12-2 stainless steel (AISI 316)
Moving cylinder diameter
273 mm
Moving cylinder height
600 mm
Moving cylinder normal steel thickness
6 mm
Moving cylinder stainless steel thickness
AISI 304: 6 mm - AISI 316: 4 mm
Moving cylinder normal steel finish
Anti-corrosion treatment
(optional: other RAL colour on request)
Grey anthracite standard painting
Moving cylinder stainless steel finish
Anti-corrosion treatment -
Grey anthracite standard painting or brushing
Other moving cylinder finish
Ribs on cylinder’s surface
(optional)
Reflecting adhesive strip
Standard - height 55 mm
Rising speed
15 cm/s
Lowering speed
25 cm/s
Manual emergency lowering
Standard
(optional: automatic lowering if power failed)
Safety reversal pressure switch
Standard
Connection line to control unit
Standard 10 m
(max. lenght 80 m - with heating resistance
)
max. 50 m
Hydraulic pump for movement
Built-in into the bollard
Hydraulic pump absorption
230V +/- 10% - 2.2A (max. 3.4A)
Hydraulic pump thermal protection
Standard
intervention threshold 120°C - automatic recovery 80°C
Protection class
IP67
Type of use
Intensive - 2,000 movements/day
Life average - MCBF
3,000,000 movements
Impact resistance (without deformation)
40,000 J
Breakout resistance
250,000 J
Nominal operating temperature
from -40°C to +70°C
(for temp. lower than -10°C use the heating resistance)
Relative humidity operation range
from 10% to 80%
Max. altitude in operation
1,500 m above s.l.
Operation maximum noise
60 dB
Weight included 10m connection line and pit
120 Kg
Weight of the pit
43 Kg
