background image

GIANT INDUSTRIES LIMITED WARRANTY

Giant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free from

defects in workmanship and material as follows:

1.

For portable pressure washers and self-service car wash applications, the

discharge manifolds will never fail, period. If they ever fail, we will replace them

free of charge. Our other pump parts, used in portable pressure washers and in

car wash applications, are warranted for five years from the date of shipment for

all pumps used in NON-SALINE, clean water applications.

2.

One (1) year from the date of shipment for all other Giant industrial and consumer

pumps.

3.

Six (6) months from the date of shipment for all rebuilt pumps.

4.

Ninety (90) days from the date of shipment for all Giant accessories.

This warranty is limited to repair or replacement of pumps and accessories of which the

manufacturer’s evaluation shows were defective at the time of shipment by the manufacturer.

The following items are NOT covered or will void the warranty:

1.

Defects caused by negligence or fault of the buyer or third party.

2.

Normal wear and tear to standard wear parts.

3.

Use of repair parts other than those manufactured or authorized by Giant.

4.

Improper use of the product as a component part.

5.

Changes or modifications made by the customer or third party.

6.

The operation of pumps and or accessories exceeding the specifications set forth

in the Operations Manuals provided by Giant Industries, Inc.

Liability under this warranty is on all non-wear parts and limited to the replacement or repair of

those products returned freight prepaid to Giant Industries which are deemed to be defective

due to workmanship or failure of material.  A Returned Goods Authorization (R.G.A.) number

and completed warranty evaluation form is required prior to the return to Giant Industries of all

products under warranty consideration.  Call (419)-531-4600 or fax (419)-531-6836 to obtain

an R.G.A. number.

Repair or replacement of defective products as provided is the sole and exclusive remedy

provided hereunder and the MANUFACTURER SHALL NOT BE LIABLE FOR FURTHER LOSS,

DAMAGES, OR EXPENSES, INCLUDING INCIDENTAL AND CONSEQUENTIAL DAMAGES

DIRECTLY OR INDIRECTLY ARISING FROM THE SALE OR USE OF THIS PRODUCT.

THE LIMITED WARRANTY SET FORTH HEREIN IS IN LIEU OF ALL OTHER WARRANTIES

OR REPRESENTATION, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY

WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND

ALL SUCH WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED BY THE MANUFAC-

TURER.

GIANT INDUSTRIES, INC., 900 N. Westwood Ave.,
P.O. Box 3187, Toledo, Ohio  43607
PHONE (419) 531-4600, FAX (419) 531-6836,
www.giantpumps.com
©  Copyright 2009 Giant Industries, Inc.

Содержание P435B













Отзывы: