Gianni Ferrari Turboloader H360, Руководство пользователя

Страница: 5 / 45

User Manual
Turboloader
Page 5
©GF Gianni Ferrari Rev. 05
www.gianniferrari.com
2 – TO OUR CUSTOMERS
We are proud to welcome you amongst our customers.
Before starting work, the operator should become thoroughly familiar with the instructions in this manual in
order to use and service the machine in the best possible way.
The machine has been designed and built in order to offer the best service in the most varied conditions. As
always, the quality of the job will depend upon correct routine maintenance of the equipment.
Contact the dealer for specific information and advice on matters not covered in this handbook. He will be more
than happy to offer assistance regarding use and maintenance of the machine.
2.1 – COPYRIGHT
The reserved rights regarding this manual " Use And Maintenance " remain in possession of the Manufacturer.
Every information (draw, photo etc.) here brought is reserved. Anybody part of the manual present can be
reproduced and diffused (entirely or partially) with any mean of reproduction (photocopies filmed etc.) without
special authorization written from the Manufacturer.
2.2 – USE RESTRICTION
The Turboloader is an articulated multifunction tools carrier designed for a professional use.
The machine cannot operate or be transferred if it is not fitted out at least with one of the equipment described in
this manual. The equipment must be produced by Gianni Ferrari or should be explicitly approved by Gianni
Ferrari.
Use with other equipment (or without equipment) is to be considered improper and dangerous because it is not
covered by our risks analysis.
Transport of other people (in addition to the driver), things or animals on the machine is not allowed.
The operator is responsible for improper use of the machine and for the use that does not comply with the
instructions given in this manual.
THIS SYMBOL IS USED TO DRAW YOUR ATTENTION TO THE SAFETY PRECAUTIONS WHICH
MUST BE TAKEN BY THE OPERATOR TO AVOID ACCIDENTOR INJURY.
PAY THE UTMOST ATTENTION WHEN YOU SEE THIS SYMBOL: YOUR SAFETY AND THOSE OF
OTHERS WILL BE AT STAKE.
The use of the protection structure ROPS with safety belts is mandatory when it may occur the risk of
rolling over in the working area. As an example the following situations can be considered dangerous:
slope variation, accidental slope, working area with strong slope variation. The use of the protection
structure ROPS does not allow to work on slopes higher than the maximum limit slope of 13° (23%).