User Manual
Turboloader
Page
23
©GF Gianni Ferrari Rev. 05
www.gianniferrari.com
SERIE S
1
10
9
2
11
1
Starter key
2
Emergency arrow ( the Loader without lights and for S
series this is the botton for clacson)
3
Switch for hydraulic frontal plug
4
Switch for light work
5
Switch for rotating lamp
6
Switch for activate hydraulic pumps 1 - 2 (in position 1
the oil flow will be at only one pump; in position 2 the
oil flow will be the addition of the flow at 2 pumps)
7
Switch for activate the floating arm
8
Switch for hydraulic blocking traction. Anti-slip valve
optional
9
Permanent activation of big frontal hydraulic plug
1
Activation automatic release of frontal fittings
AUTOMATIC HOOKING FOR FRONTAL FITTINGS
THE OPERATION OF HOOKING AND RELEASING OF THE FRONTAL ATTACHMENTS, MUST BE
DONE FROM EXPERT AND QUALIFIED PERSONS, THAT KNOW THE RISKS ALSO NOT
SPECIFIED IN THIS MANUAL. IN OPPOSITE WAY CONTACT THE GIANNI FERRARI SERVICE.
THE MACHINE MUST BE STABILIZED IN A FLAT GROUND
The operations of assembling or disassembling of the frontal attachments must be done only in case of replacement of
it, or in case of its reparation. The normal maintenance operation (cleaning) are possible without remove of the
attachment.
In case of hooking of the attachment proceed in the following way :
-
Position the attachment on a flat and stabilized surface (
1
).
-
Approach to the attachment with retracted arm, and universal frontal plate tilted of 15°-20° respect to the plate of
the hedge-cutter (
2
).
-
Through the proper button open the automatic hooking pins for attachments (hydraulic cylinders on the frontal
plate). The button has a safety device to avoid the fortuitous unlocking. To activate it, push the button and in the
same time raise the black ring-nut below
(
3
).
One sound alarm advise the operator that the command is activated.
-
Approach slowly to the attachment, maintaining a perfect alignment between the two plates.
-
Raise slowly the arm until at the perfect match between the two plates (
A
and
B
).
-
Using the floating movement of the front plate hook the attachment
-
Close the locking pins pushing the yellow button (
4
).
