User Manual
Turboloader
Page
29
©GF Gianni Ferrari Rev. 05
www.gianniferrari.com
1
2
CONTROL OF TELESCOPIC ARM
(S serie)
The Turboloader S series is equipped with nr 2 hydraulic joystick. Following are
explained the functions of the two joystick
Joystick 1
-
Moving back the joistick you lift the frontal arm.
-
Moving forward the joistick (first step I) you lower the frontal arm.
-
Moving forward the joystick (second step II) you bring the arm in floating
position.
-
Moving right the joistick you lower the frontal fittings plate.
-
Moving left the joistick you lift the frontal fittings plate.
Joystick 2
-
Moving back the joystick you activate the return of the telescopic arm (optional)
-
Moving forward the joystick you activate the output of the telescopic arm
(optional)
-
Moving right or letf the joystick, it will operate the proportional movement of auxiliary.
FOR INEXPERIENCED OPERATOR, BEFORE TO START A WORK, PROVE THE ALL MOVING
OF THE LIFTING ARM ,TO ACQUIRE GREATER SECURITY DURING THE SAME.
USE OF HYDRAULIC ACCESSORIES (AUXILIARY) (M – H series)
The hydraulic accessories are presents in the front part of the
Turboloader. There are Nr°5 swift connections to the operation of
auxiliary. The 2 more little are associated at the yellow button
(see the above chapter). The others 3 connections in addition at
the delivery have to need a drain. These auxiliary are associated
at the 2 green button on the joystick, that it offers the possibility
to choose the direction of the oil flow and in this way also, the
possibility to choose if use only one pump or 2 pumps together to
increase the oil flow. Please note that the we can be used together
the 2 auxiliary systems if the attachments offers the possibility.
To change the numbers of R.p.m. (pumps flow) to act on the
accelerator lever.
USE OF HYDRAULIC ACCESSORIES (AUXILIARY) (S serie)
On the Turboloader S, the hydraulic accessorie sare only 3 . They are
controlled from the Joystick 2 as explained in the previous paragraph.
