5
4
1. Special Note
Special prompts will be shown according to the safety levels with special warning
remarks in following chapters, including:
【
Danger
】
Indicating that the situation is highly dangerous and requires your caution.
【
Warning
】
Indicating that the situation is of medium-level dangerous and requires your
caution.
【
Caution
】
Indicating that the situation is of low-level danger and requires your attention.
【
Prohibited
】
Indicating that the operation is dangerous and thus prohibited.
【
Attention
】
Indicating that safety or other aspects need to be noticed.
In addition to the special warning remarks, other similar descriptions in the Manual also
require your attention.
2. Importance notice about Cube-N3
Giada Cube-N3 represents a high-tech and precision product. To ensure proper
operation, the user must carefully read through the information below.
2.1 To prevent overheating of the computer, make sure the radiation holes are not
blocked during the operation.
2.2 When the system access the CD-ROM or other media, please do not remove the
medium. Otherwise, the system might collapse or the data might be damaged.
2.3 Please do not remove the hard disk when the system is running. Otherwise, the
data might be lost or damaged. Shenzhen JieHe Technology Development CO.,
LTD will bear no responsibility for the loss of user’s data.
2.4 In order to ensure safety of yourself and the hardware, please make sure the
device is properly grounded when the external power source is used. If the
computer is not used for an extended period of time, please unplug the power
cord to avoid possible damage on the system. The power source from the local
power grid shall be stable and disturbance free. If you are not sure about the
specification of the device, you may consult your local distributor or the electric
power company. Do not damage the grounding wire on the power plug. Do not
take the power adapter apart without permission.
2.5 Only use power adapter exclusively designed for this product. Otherwise, your
Cube-N3 might be damaged.
2.6 Do not handle the computer with only one hand nor allow it to be in imbalanced state.
2.7 If you set a password for the computer, never forget that password. Otherwise, you
might not be able turn on the system. In case you forget the password, you should
contact the distributor or the authorized repair center. However, that may cause the
loss all your data on the system.
Chapter I
Notices
3. Precautions
Some basic knowledge is required to operate Cube-N3. In addition, children should not
use Cube-N3 independently. If the children need to use Cube-N3, they must be supervised
by adults.
Operating Conditions
Danger To avoid unexpected accidents, the computer should work under the conditions
described below:
Temperature for storage and transport
-40°C to 55°C
RH for storage and transport
20% - 93%(40°C)
Barometric pressure
86 kPa - 106 kPa
Power supply
100V-240V, 50/60Hz
Humidity
35% - 80%
Operating temperature
10°C - 35°C
【
Warning
】
To avoid damage caused by the environmental conditions (moisture, dust,
food, liquid, exposure to the direct sunshine), the product should be placed
in dry places with good ventilation. Never allow liquid or other foreign object
to get into the computer. Otherwise, short circuit may be formed in its internal
parts, which might result in electric shock or fire.
Before The Use
【
Warning
】
After the computer is stored in the environment with temperature lower than
10°C, it should be placed in the environment with temperature 10°C-35°C for
over two hours before use. To allow the computer to restore its temperature
naturally, the packing of the product should not be removed in the process.
Otherwise, excessively temperature rise might result in damage to the
computer when it is electrified.
【
Caution
】
Before use, check and make sure the connections, power supply and other
devices satisfy the requirements specified in the Manual.
Handling, Transport and Storage
【
Caution
】
Handle with care when you move the device. When the product needs to be
shipped, it should be placed in the original packing carton and positioned
according to the indications for such occasions.
In order to avoid accidents, the packing materials should be out of the reach
of the children when the product is warehoused. According the regulations
stipulated in related state standard (GB/T9813-2000), microcomputers should
be placed under room temperature (10°C-35°C) for over two hours before use
if they are stored or shipped below 10°C, so as to avoid damage from the low
temperature when the device is electrified. To allow the computer to pick up
its temperature naturally, the pack of the product should not be removed in the
process. Otherwise, excessively temperature rise might bring about frost and
condensation and thus result in damage to the computer when it is electrified.
Содержание cube N3
Страница 1: ......
