Giada cube N3, Руководство пользователя

Страница: 10 / 31

17 16
3. Advance (Advanced BIOS setup)
3.1 CPU Configuration (CPU setup)
3.2. IDE Configuration
Hard disk write protect This item is used for enabling or disabling the function of
“write protect”. This function can be performed only when the
device is accessed via BIOS.
IDE Detect time out (Sec) This item is used for automatically detecting the waiting time
of HDD devices.
The optional values include [0][5][10] [15] [20] [25] [30] [35].
Figure 4.3
Figure 4.4
3.3. USB Configuration
Legacy USB Support This value is used for enabling or disabling the supports for USB
devices. If the default value [Auto] is selected, the system will
automatically check whether USB device is available in its
startup process. If USB device is available, USB controller will
be activated. If you set this item as [Disabled], the USB controller
inside the system will be in OFF state, regardless of whether
USB device is available. The options are [Disabled], [Enabled]
and [Auto].
USB2.0 Controller Mode This value is used for setting the transmission rate for USB
2.0 devices. The modes include HiSpeed (480Mbps) and
Full Speed (12Mbps). The setup options are [HiSpeed] and
[FullSpeed].
4. Power management (ACPI)
ACPI Version Features To set the power type the system can support.
ACPI APIC support This item allows you decide to put ACPI RSDT list or not.
Options are [disabled] and [enabled].
AMI OEMB table Options are [disabled] and [enabled].
Headless mode Options are [disabled] and [enabled].
Figure 4.5