27
26
1.
Sound Problem
1.1
No sound
·
Double click the speaker-shape icon at the lower right corner and check whether
the speaker’s volume is set to the mute mode or to the lowest level through the
dialogue box.
·
Most of the problems on sound are related to the software. If Cube-N3 ’s audio unit
worked well before, the current sound problem might be caused by the incorrect
settings of software.
1.2 Device can’t perform recording
·
Double click the speaker-shape icon at the lower right corner and check whether
the speaker’s volume is set to the mute mode or “Line-in” is set to the lowest level
through the dialogue box;
(1). Press [Options] and select [Properties];
(2). Select [Record] and press [Confirm];
(3). Press [Confirm] again, and the record volume interface will be popped up.
2
. Hard Disk Problem
Hard disk can’t work or identify normally
·
If your hard disk was upgraded not long ago, please make sure the interface of
hard disk is not loose and its placement is absolutely correct. For that purpose,
you can disconnect the hard disk and re-connect it, and then re-start the computer.
·
When you use HDMI for output, you
should reach [Control Panel] [Audio]
and set the digital output device
(HDMI) as default value.
·
When you use S/PDIF for output, you
should reach [Control Panel] [Audio]
and set the digital output device
(S/PDIF) as default.
·
New hard disk needs to be partitioned and formatted. The operating system and
driver need to be re-installed.
·
Please check the indicator for the hard disk. When you access the files, the
indicator should blink intermittently.
·
The new hard disk might be defective.
·
If your computer was attacked by the static charge or stricken by something, the
hard disk might have been damaged.
Hard disk runs too slowly
·
If your hard dish has been used for a long time, the great number of files may
cause many disk fragments. In this case, you can reach [Start>Program>
Accessories>System Tools> Defragment Disk] to reorganize the disk. This
process may take some time.
·
Your hard disk might have been infected by viruses.
Files damaged
Please execute surface scanning process in [Scan Disk] to check the disk. Double
click [My Computer], right click “C:”, select [Properties], and then click [Start Check]
in the options of error-checking state in [Tools] to execute the program of disk
scanning.
3. Display Problem
Monitor
Black screen is seen when the system is started.
·
Check and make sure your Giada Cube-N3 is not in [Sleep] or [Standby] mode.
Under such mode, the monitor will be turned off to save power.
When the digital output device (HDMI) is externally connected to LCD TV,
the screen becomes blue and no image is output.
·
Please set the output of LCD TV as HDMI output.
4. Memory Problem
After you install memory module of higher capacity, no increased memory
space is shown when POST performs self detection at the time of startup.
·
Memory slot might not have been correctly installed
·
Memory card might be broken
·
Your system might not be compatible with some memory modules.
Information on error is sent out when the Operating System is running.
·
Generally, this problem is related to the software or Windows operating systems.
·
Please turn off the application software not currently used and re-start the
computer.
·
Some software require higher system memory, you will have to upgrade the
memory with higher capacity.
Содержание cube N3
Страница 1: ......
