Gi FLY, Руководство пользователя

Страница: 12 / 15

Connecting mode
1 DHCP Mode Auto obtain IP address mode.
Figure 5-5-4
Figure 5-5-6
Wallpaper Set the system wallpaper
In the interface of Ethernet configuration Output mode Set TV output mode, including
Ethernet Equipment Currently can be
720p, 1080p, etc.
applied Ethernet equipment "eth0" acquiescently.
Display position : Set TV representation rate to
adjust screen size.
Font Size : Set system font size.
Figure 5-5-8
Downloaded : Display users' personal downloaded
and installed applications
Running : Examine currentlyrunning service, visit
and manage the service.
5.5.7 Personal Settings
Personal settings include Account & Synchronization,
2. Choose Setting ->system setting->system
upgrading into the system upgrading interface,
see as picture 5-5-10.
Figure 5-5-3
3. Click the right upgrading among all listed
upgrade packages, then a confirmation dialogue
pops up , as shown in picture 5-5-11:
2 Static state IP Static IP mode
When choose Static state IP mode, you need
to setup all IP parameters correctly and save it.
5.5.3 Sound Setup
Press
【
OK
】
button to enter in "Sound".
Figure 5-5-5
Volume: Set the system volume;
Sound Output Mode: Choose PCM or RAW model.
5.5.4 Display Setup
Press
【
OK
】
to enter in "Display".
5.5.5 SD Card and Storage
Device
Show SD card and storage device and internal
memory information, and operations of unloading,
Installation and formatting.
Figure 5-5-7
Note: Please unload it safely before formatting Hard
Disk.
5.5.6 Applications
Choose "Apps" and press
【
OK
】
to enter in,
like Picture 5-5-8 shows:
LBS, Safety, Language & Input, Backup & Reset, as
shown in picture 5-5-9.
Figure 5-5-9
Account & Synchronize:
All kinds of accounts can be added, including Google,
Skype, Twitter and so on, realizing the synchronization
of data
Location Based Services : Set whether to open
Google's location service or not
Safety: Set password visible, equipment control,
application installation, etc.
Language & Input : Set system language and
default input method.
Backup & Reset : Back up data and restore
factory setting.
Figure 5-5-11
4. Click "OK" to upgrade. system will reboot then
into the uploading interface, as picture 5-5-12:
Figure 5-5-12
5. The machine starts to clear FLASH and showing
completely loading the upgrade files, see as picture
5-5-13.
5.5.8 System Update
1. Insert the SD card or U-disk that store upgrading
files.
21 22