Ghibli & Wirbel RUNNER R 150 FD 100, Использование и обслуживание

Страница: 38 / 272

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
EN
- 8
43)
ON/OFF
Brush unit button (ON/OFF)
- The activation of the brush unit is ena-
bled by turning the key (29) to the “ ON ”
position.
- Press the button (43) to lower the brush
unit;
the symbol “ ” on the display will
turn on.
- The brushes start to rotate when press-
ing the accelerator pedal, they stop
when the accelerator pedal is raised.
NOTE:
The brushes rotate whether there’s the
forward motion or the reverse active
and even if the machine is still with the
potentiometer (30) placed on “ 0 ”.
- When the machine is still, with the head
lowered, the brushes still and the key
(29) on “ ON ” position, after a certain
period of inactivity the head will auto-
matically lift.
- If you press the “
ON/OFF
” button (43)
while the brushes are rotating, they’ll
stop, the unit lifts and the symbol on the
display turns off.
44) Acoustic warning button
- Press the button “ ” to produce an
acoustic warning signal.
- Turn the key (29) to the “ ON ” position to
control its functioning.
45)
Rotating flash lights button
- When pressed, with the key (29) in the
“ ON ” position, it starts the flash lights.
46) Operating lights button
- When pressed, with the key (29) in the
“ ON ” position, it turns on the operating
lights.
47) Water supply button
- The water supply is activated when the
key (29) is on “ ON ” position, the (43)
“
ON/OFF
” button is inserted and when the
accelerator pedal is pressed.
- Press (47) “ ” button, on the display
the symbol “ ” appears, and the wa-
ter electrovalve opening is prepared. Its
functioning is controlled by the pressed
accelerator pedal.
Repeatedly press the “ ” button
(47) to increase the water quantity;
when the maximum quantity is reached,
it’ll be shown on the display by the
“ ” symbol, if the “ ” button (47) is
pressed again the function will be disabled.
48) Chemical agent dispenser
button
- The chemical agent supply is activated by
the key (29) in“
ON ” position, by the but-
tons (47) “ ” and 43 “
ON/OFF
” inserted
and by the pressed accelerator pedal.
- Press the “ ” button (48), on the
display the symbol “ ” appears,
and the chemical agent dosage is pre-
pared. The dosing pump functioning is
controlled by the pressed accelerator
pedal.
Repeatedly press the “ ” button
(48) to increase the chemical agent
quantity; when the maximum quantity
is reached, shown on the display by the
“
” symbol, press the “ ” button
(48) again to disable the function.
00_Manu_RUNNER_1ed 10-2020 - 49029500.indb 8 00_Manu_RUNNER_1ed 10-2020 - 49029500.indb 8 16/10/2020 08:14:48 16/10/2020 08:14:48