Ghibli & Wirbel RUNNER R 150 FD 100, Использование и обслуживание

Страница: 40 / 272

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
EN
- 10
button (40) “ ” to stop operation, the
pictogram “ ” when the aspirator stops.
“ ”= Silent operation
Vacuum in operation.
It will be shown on the display when the
“
” button (42) is pressed, indicating that
the suction is working with a reduced rpm;
by pressing the “
” button (42) again,
the symbol “ ” disappears and the symbol
“ ” is shown, activating the normal func-
tioning.
“ ” = Water dispensing presetting
On the display is shown when you select the
“
” button (47) indicating that the water
supply electrovalve is active.
“ ”= Brush rotation presetting
On the display is shown when you select the
“
ON/OFF
” button (43) indicating that the brush
rotation is active; by pressing the “
ON/OFF
”
button (43) again the brush rotation motor
us disabled, the pictogram “ ” disappears
and the head lifts.
“ ” = Maximum liquid level in
recovery tank
This displays when the fluid in the recovery
tank has reached hte maximum level.
“ ” = Clean water tank empty
Is shown flashing when the clean water tank
reached the minimum level; the machine
keeps working anyway.
The indicator stops only in presence of the fol-
lowing conditions:
- full tank;
- after a few seconds after reusing the ma-
chine.
“
ECO
” = ECO mode
Is shown when the ECO function is active
through the “
ECO
” button (50).
“ ” = Accelerator pedal pressed
This symbol inserts when the machine starts
indicating a wrong starting operation se-
quence, to remove the alarm release the ac-
celerator pedal (7) (Fig. 10).
“ ” = Chemical agent dosing button
Is shown on the display when the “ ” but-
ton (48) is pressed indicating the
quantity of measured chemical agent, with
the dosage % at its side:
- The settable percentages are:
0,3% - 0,5% - 1% - 2% - 3%.
8.1 PARAMETER
SETTING
(Fig. 9)
The operator can access the menu to set the
following parameters:
Language;
Battery type;
Brightness / contrast.
Proceed as follows to access the menu:
- Press and keep pressed the “
” (47)
and “ ” (42) buttons, then turn the
starting key (29) to start the machine until
the following display is shown:
-- ID CHECK --
insert password: 0
- Release the pressed keys.
- Insert the Password by pressing the
“
” or “ ” buttons (51) until on the
display is shown the number “10”.
00_Manu_RUNNER_1ed 10-2020 - 49029500.indb 10 00_Manu_RUNNER_1ed 10-2020 - 49029500.indb 10 16/10/2020 08:15:22 16/10/2020 08:15:22