GGP ITALY GBW 51 RS, Руководство оператора

Страница: 56 / 92

54
keeping the safety level and original performance of the
machine unchanged in time.
Store the lawnmower in a dry place.
1) Wear strong working gloves during any cleaning, mainte -
nance or adjustment operation on the machine.
2) Carefully clean the machines with water after each cut;
remove the grass debris and mud accumulated inside the
chassis to avoid their drying and thus making the next start-
up difficult.
3) Use the specific attachment for the water hose to clean
the internal parts of the lawnmower (if provided). Place the
machine on a flat firm surface, select the lowest cutting
height and always stand behind the lawnmower handle when
cleaning.
4) The paintwork on the inside of the chassis may peel off in
time due to the abrasive action of the cut grass; in this case,
intervene promptly by touching up the paintwork using a rust -
proof paint to prevent the formation of rust that would lead to
corrosion of the metal.
5) If accessing the lower part is necessary, only tilt the machine
on the side indicated in the engine manual, following the rel -
evant instructions. In models that include side discharge,
remove the discharge deflector (if installed­
*
3.1.d).
6) Do not drip petrol onto the plastic parts of the engine or the
machine to prevent damaging them and remove all traces of
spilt petrol immediately. The warranty does not cover dam -
age to plastic parts caused by petrol.
4.1
Each intervention on the blade is best if conducted at a
specialised Centre that has the most appropriate tools.
Only blades with the following codes must be used on this
machine:
81004381/1
Blades must always be marked . Given the product evolution,
the above mentioned blade may be replaced in time by others,
with similar interchangeable and operating safety characteris -
tics.
Reassemble the blade (2) with the code and markings facing the
ground, following the order indicated in the illustration.
Tighten the central screw (1) using a torque wrench set to 35-40
Nm.
4.2
On models with drive units, adjust the tension of the belt
with the nut (1) to get the right measurement (6 mm).
5. ENVIRONMENTAL PROTECTION
Environmental protection should be a priority of considerable
importance when using the machine, for the benefit of both
social coexistence and the environment in which we live.
– Try not to cause any disturbance to the surrounding area.
– Scrupulously comply with local regulations and provisions for
the disposal of waste materials after cutting.
– Scrupulously comply with local regulations and provisions for
the disposal of pakagings, oils, petrol, batteries, filters, dam -
aged parts or any elements which have a strong impact on the
environment; this waste must not be disposed of as normal
waste, it must be separated and taken to specified waste dis -
posal centres where the material will be recycled.
– At the time of decommissioning, do not pollute the environ -
ment with the machine, hand it over to a disposal centre, in
accordance with the local laws in force.
6. ACCESSORIES
WARNING: For your safety it is strictly prohibited to fit any
other accessory other than those included in the following list,
they have been exclusively designed for the model and type of
machine you are using.
6.1
Kit “Mulching” (if not supplied)
It finely chops the grass cuttings and leaves them on the lawn,
instead of collecting them in the grass-catcher.
Should you have any doubts or problems, do not hesitate to
contact your nearest Service Centre or your Dealer.