Gfp 563TH-4
December 2019
4
•
Contact an electrician should the attachment plug provided with the laminator not match the
receptacles at your location
•
Ensure that the voltages of the power supply you are using match the rated working
voltages before operations. Do not use incorrect power supply
•
Do not use damaged wires or sockets. If abnormal conditions occur, switch off the
power supply first.
•
Only a licensed electrician should install wiring and outlet for the laminator
•
Do not defeat or remove electrical and mechanical safety equipment such as interlocks, shields
and guards
4. Regulatory Compliance Statements
cTUVus Certification
This test mark, also referred to as the "cTUVus mark", serves as proof of compliance with US national
standards from UL adopted by OSHA and the Canadian national standards of CSA adopted by the
Standards Council of Canada (SCC). US Authorities having Jurisdiction (AHJs) and Provincial Regulators
across Canada recognize the cTUVus mark as proof of product compliance to published national standards
and code requirements. The cTUVus mark is officially recognized as an equivalent and direct replacement
of the UL and CSA marks.
Federal Communications Commission (FCC) Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
