Gfp 563TH-4
December 2019
20
18. Inserting rewind shafts
1.
Slide a cardboard core onto the rewind shaft
2.
Set one end of the rewind shaft into the open side support bracket
3.
Align the arrow and shaft tongue with the slot in the opposite side support bracket
4.
Rotate both
locking outer sleeves to the closed position on the support brackets
19. Feed tray safety latch
1.
A Feed Tray Safety latch rotates freely with the feed tray
2.
Ensure latch is in the locked position whenever the feed tray is rotated to the up position
20. Removing Press Roller Assembly
1.
Unscrew knurled thumb screw securing left side of Press Roller assembly
2.
Lift off and remove Press Roller assembly
Safety Latch
