51
Faults when setting the final limit positions
Fault description
Fault correction
8.1
▪ When setting the final
limit positions, the travel
distance was smaller than
the smallest possible
▪
Reset door control to factory setting (
9.5
).
All settings will be lost!
▪ When resetting the final limit positions, move
the door for at least one second before storing
the position.
9.2 Maintenance
Carry out at least the following points during annual
maintenance:
▪
Check for external damage.
▪
Check for moisture penetrating the interior.
▪
Check all connection cables. Replace damaged connecting
cables.
Use a dry cloth to remove dust and dirt from the door control.
Danger to life due to electric shock!
▪
For cleaning, disconnect all lines from the incoming power
supply.
10 Disposal
Separate the product from the packaging and recycle the
packaging materials.
Separate varied materials from the door control system as far
as possible and dispose of them professionally according to
legal and local regulations.
