7 Setting the final limit positions
...........................................26
8 Programming
.........................................................................28
0.1 Operating mode ........................................................29
0.2 Output rotating direction ...........................................30
1.1/1.2 Coarse correction of final limit position
.....................30
1.3-1.5 Fine correction of final limit positions
........................31
1.6 Door positions for intermediate open .......................31
1.7/1.8 Switching position of relays X20/X21 ......................32
2.1 Safety edge in pre-limit area ....................................32
2.3 Automatic closing .....................................................33
2.4 Reaction of automatic closing to photocell ..............34
2.5 Limiting reversals .....................................................35
2.6 Radio and pull switch functions ...............................36
2.7/2.8 Relay functions of X20/X21 ....................................37
2.9 Specifying control device for intermediate open ......38
3.1 Force monitoring of sectional doors ........................39
3.2 Deactivation of the photocell ....................................40
3.8 Shorten/lengthen the reversing time ........................41
4.1-4.9 Frequency inverter functions ...................................42
8.5/8.6 Setting the maintenance cycle counter ....................44
9.1 Readout of cycle counter .........................................45
9.2 Readout of fault indications .....................................45
9.3 Readout of the cycle counter since last prog. change .....46
9.4 Readout of software version ....................................46
9.5 Reset to factory settings / use of GfA-Stick .............46
9 Maintenance and repair .........................................................47
9.1 Fault indication ......................................................................47
9.2 Maintenance
..........................................................................52
10 Disposal ..................................................................................52
