Chapter 1
Introduction
1.1 Introduction
Your new +GF+ SIGNET 9010 Intelek-Pro Flow
Controller has been specifically designed for liquid
flow rate measurement in process pipes. The
controller's compact 1/4 DIN enclosure (front) is
NEMA 4X/IP65 rated and ideal for installing into
instrumentation panels with limited space.
Modular "plug-in" input/output option cards allow
you to customize your flow controller to your flow
system's requirements. The controller's unique
"slide-out" chassis design makes option installation
fast and simple. Smart self-configuring
microprocessor based circuitry automatically
inventories installed options during power-up,
allowing you to upgrade your system in seconds
without the need for additional equipment.
The unit's front panel features a highly visible
4.5- digit (seven segment) and 8-digit (alpha-
numeric) liquid crystal display with adjustable
contrast. Active flow rate, accumulation, and
alarm relay information is quickly accessed at a
glance. During calibration the user is prompted
with clear step-by-step instructions on the unit's front
panel display.
The +GF+ SIGNET 9010 Intelek-Pro Flow
Controller is fully compatible with all +GF+ Signet
flow sensor products, yet also accepts other
analog inputs, such as 4 to 20 mA or
0 to 5 VDC etc.
The technical data given in
this publication is for general
information purposes only. It
implies no warranty of
whatever kind.
1
