GEZE TS 5000 E-ISM, Руководство по установке

Страница: 16 / 28

TS 5000 E-ISM
GB 8
Initial operation
X X
Open door leaf to desired hold-open angle and fix it there ( 1. ).
X
X
Remove cable protection foils from guide ( 2. ).
X
X
Loosen clamping screws of electrical hold-open device ( 3. ).
X
X
Move electrical hold-open device until catch contacts sliding block ( 4. ).
X
X
Screw down electrical hold-open device securely ( 5. ).
X
X
To prevent loops from forming, tighten cable and fasten cable protection at hold open device end (
6.
).
X
X
Stow away (
7.
) loose cable in the cable protection and free area.
X
X
Secure exposed cable with the cable protection film (
8.
).
CAUTION!
X
X
Check free upward movement of the rocker!
If necessary, the holding force can be adjusted (
9
.). According to EN 1155, the release torque should
amount to 40 Nm - 120 Nm for a door with 90° hold- open angle.
6.11 Mounting cover panel
CAUTION!
X
X
Do not pinch cable.
85 85
Fig. 6.11.1
X
X
Clip on moving-leaf cover panel and fixed-leaf cover panel ( 1. ).
X
X
Shorten adjustable-size middle cover panel “A” to size “C” ( Fig. 6.11.1 ).
X
X
Clip on middle cover panel ( 2. ).
X
X
Insert inspection caps between cover panels (
3.
).
7 Initial operation
7.1 First Operation and Function Test
X X
Switch on power.
X X
Open moving leaf and engage in electrical hold-open device.
X X
Open fixed leaf and engage in electrical hold-open device.
X
X
Push moving leaf out of electrical hold-open device.
Fixed leaf closes automatically. Moving leaf remains in waiting position of closing sequence control and also
closes when fixed leaf is closed.