GEZE Powerturn, Инструкция по установке и обслуживанию

Страница: 20 / 56

Powerturn
20
Preparing installation
6.2.7 1-leaf installation with cover extension kit or extended cover
Only install approved components.
Partitioned cover, length = min. 115 mm
X
Install the mounting plate (1) (refer
to chapter 7.1).
X
Slide the template (2) into the mounting
plate (1).
X
Adjust the base plate (4) to the template (2)
or the shape of the door using a spirit level
if necessary.
X
Mark the drill hole positions.
X
Remove the template.
If a smoke switch is installed, the V-marking (3)
must be pointing towards the drive.
X
Drill bore-holes and screw down the
base plate (4).
If the base plate is longer than 500 mm,
additional fixing drill holes are prepared
in the centre of the base plate.
X
Fix the cover fixings (5) with 2 cylinder
head screws M5 × 10 (6) each.
If the base plate is longer than 500 mm,
an additional cover fixing is provided
in the centre.