23
Configuration program – wide-range reader GCLR 2000
GCLR-I 2000/GCLR-O 2000
5.3
Setting up a connection with the GCLR 2000
X
Set DIP switch 2 on the
GCLR to "ON".
X
Press the button "Read
out data" (1) in the main
menu of the configuration
program.
X
If a fault message appears,
open the "Settings" menu
in the main menu of the
configuration program.
X
Check the settings of the
COM port and DIP switch
and try again.
After successful readout of the data, the data of the connected reader are
shown in the area (1), Chapter 5.2.
Transponders that have already been taught are shown in the area (3),
Chapter 5.2.
