Electrical vehicle charging unit JOINON EASY HOME and PARKING
16
8.2.
CHARGING PROCESS
8.2.1. JOINON EASY HOME
While charging, it is not possible to remove the plug because it is locked by the charging station. In order
to remove the plug, first stop the charging.
Charging types
The charging station has two charging modes:
nominal
(I) and
limited
(II).
If the nominal charging process is selected, the station will charge at the nominal current set at the factory.
The limited charging type performs charging at 10 A. Therefore, the charging process will be longer.
Start of the charging process
1. Open the door on the enclosure and operate the modular selector (I-0-II) to activate the desired charging mode.
To select nominal charging, move the selector to position I (move the lever down).
If instead you want to perform limited charging, move the selector to position II (move the lever up).
The front LEDs flash yellow while waiting for the vehicle to be connected.
During the charging process, the type of charging can be changed by moving the selector to the desired position.
NOTE: Always close the door on the enclosure while charging the vehicle to prevent jeopardising the product's IP degree if installed
outdoors
2. Connect the vehicle to the charging station.
Position I: Nominal charging
Position II: Limited and/or deferred charging
