7
Potential hazards for people
In order to protect your own safety, observe the following warnings.
HAZARD: crushing and injury of limbs.
Always follow the instructions supplied in the manual for device handling and positioning.
The weight of the device can cause injuries if not handled correctly.
Potential hazards for the device
In order to protect the device, observe the following warnings.
During operation, the device requires an air flow free of impurities.
It is very important to maintain the vertical position and the entrances free from all obstacles to allow the
air flow to enter inside the device.
Before activation, and after any duly authorised operation, check that the device is ready to start to operate.
Then, connect it following the instructions in the manual.
Do not touch the boards or the electronic components. The more sensitive components can be damaged
or destroyed by static electricity.
Do not disconnect or connect any terminal while the device is operating. Disconnect and check for the absence
of voltage before performing any operation.
3.2.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
When working on the device, it is recommended to use the necessary safety equipment.
These devices are:
- Safety footwear;
- Helmet;
- Helmet with a face mask;
- Work garments;
- Dielectric gloves
The equipment or devices used for operations with the system energised must have at least III-1000 Volt category
isolation. If the regulations in the location of installation require other types of personal protective equipment, the
equipment must be integrated in a suitable manner.
