5
2.1
FULFILMENT OF REGULATIONS
CE marking
The CE marking is indispensable in order to sell any product in the European Union, without prejudice to the
standards or laws of the individual countries. The charging stations have a CE marking as they comply with the
following directives:
• Low Voltage Directive 2014/35/EU.
• Electromagnetic Compatibility Directive 2014/30/EU.
In order to comply with each directive, it is sufficient to fulfil the parts of the relative harmonised standards appli-
cable to this device.
Low Voltage Directive
The charging stations comply with this directive, as they fulfil the applicable parts of the harmonised standard:
EN 61851-1: Electric vehicle conductive charging system Part 1: General provisions.
Electromagnetic compatibility directive
The charging stations comply with this directive, as they fulfil the applicable parts of the harmonised standards:
•
EN 61000-6-1 Electromagnetic compatibility (EMC).
Part 6-1: Generic standards - Immunity for residential, commercial and light industry environments.
•
EN 61000-6-3 Electromagnetic compatibility.
Part 6-3: Generic standards - Emissions for residential, commercial and light industry environments.
Fulfilment with this standard requires compliance with the requirements and procedures of the other standards
in the same series.
2.2.
EMC REQUIREMENTS
These charging stations are equipped with the filtering elements necessary for the fulfilment of the EMC require-
ments for domestic applications, in order to avoid radio interference with other devices outside of the system.
2.3.
DEGREE OF PROTECTION
These charging stations have an IP54 degree of protection against external agents.
This device is designed for indoor and outdoor use.
2.4.
POLLUTION RATING
The degree of pollution for which these charging stations are prepared is PD3.
2.5.
SOCKET-OUTLETS
The charging stations can be supplied with different connector configurations depending on the customer's require-
ments.
The following connectors are available:
REGULATORY ASPECTS
2.
IEC 62196-2 Type 2
IEC 62196-2 Type 2
IEC 62196-2 Type 1
