JOINON EASY electric vehicle recharging unit
38
To delete an RFID card from the local list:
#
Action to be carried out
RGB LED status
1
Swipe the MASTER key across the RFID scanner to enable
the storage phase
From fixed green to flashing white
2
Swipe the MASTER key across the RFID scanner again to
enable the deletion phase
From flashing white
to flashing red
3
Swipe the card that you want to delete across the RFID
scanner
Fixed green for 2 seconds
4
To quit the RFID card storage menu, swipe the MASTER key
across the RFID scanner
From flashing red
to fixed green
To enable a recharging session:
#
Action to be carried out
RGB LED status
1
Make sure there are no errors on the charging station
Fixed green
2
Swipe an RFID card across the scanner, close to the graphic
symbol
Fixed green
3
If the card is recognised (i.e. it's in the local list), the charg-
ing station is activated to begin the recharging session, and
waits for the car to be connected
Flashing green
4
Once the car has been connected, the station checks that
everything is OK for the recharging session
Flashing green
5
If there are no problems, the charging station will block the
plug in the socket-outlet both electrically and mechanically.
The recharging session begins
Flashing blue
6
The car is asking the charging station for energy
Fixed blue
7
Recharging session in progress
Fixed blue
8
To end the charging session, take the same RFID card
used to launch the session and swipe it across the scanner
again. The station ends the charging session by releasing
the plug from the Type 2 socket-outlet
From fixed blue or flashing blue
to flashing green
9
Take the plug out of the socket-outlet on the charging
station side
From flashing green to fixed green
10 If the station detects no errors, it will return to standby
Fixed green
10.3.
CLOUD
In this mode, the charging station is connected to a control centre. The recharging service is only enabled for users
registered with the JOINON service (via the JOINON app or the website). To enable and interrupt the charging
session, follow the information given on the app. The app also shows the cost of accessing the service, which may
vary from one station to another.
