Gewiss GW 16 971CB, Руководство по установке

Страница: 17 / 44

17
E
N
G
L
I
S
H
USER INSTRUCTIONS
If there is a power failure, the device will not implement any action. When the power supply is
restored, the thermostat will reactivate the conditions that were in place beforehand.
The thermostat is equipped with an energy accumulation system to maintain the time in the event
of a power failure (max 1h).
Following the drop and subsequent resetting of the power supply, the relay contact remains open.
The device does not require any maintenance. Use a dry cloth if cleaning is required.
CLEANING FUNCTION
This function makes it possible to temporarily inhibit the display so the glass plate can be cleaned
without making any unintentional modifications. The function can be enabled/disabled as follows.
Enabling:
• touch the upper sector of the circular slider and the Mode button key at the same time for at
least 3 seconds.
• wait for a short beep (if the acoustic signal for glass cleaning is enabled) or the contemporary
flashing of the touch button keys (for the luminous signal that glass cleaning has been enabled).
• wait for the count down to appear on the display (30 sec.) during which it is possible to clean
the plate.
Disabling:
• wait for the count down to reach zero.
Behaviour upon the failure and resetting of the power supply
Maintenance