10
9
It’s also recommended to release some water before brewing
coffee at the first time or when you don’t use the appliance
for a long time.
Note: There may be noise when pumping the water on the
first time or when you don’t use the appliance for a long time,
it is normal, the appliance is releasing the air inside. After about
20s, the noise will disappear.
To make a good Espresso, we recommend you to preheat all the parts,
like portafilter ❻, single-cup filter ❹, double-cup filter ❺ and your
cup, so you can better enjoy the taste flavour of your coffee.
You can customize the amount of single cup/short dose according to
your own needs from 25mL to 60mL，while double cup/long dose is
60mL to 130mL.
6.2 HOW TO MAKE ESPRESSO
(1) Fill the water tank ⓰ with clean, room
temperature water in the coffee maker.
NOT exceed the “MAX” line. (If you had
operated the machine just now, skip this
step.)
(2) Fix corresponding single-cup filter
❹/ double-cup filter ❺ into portafilter
❻ , make sure the dot on the filter aligns
with groove in the portafilter ❻ , and
add corresponding coffee powder to
single-cup filter ❹/ double-cup filter ❺ with the spoon & tamper ⓱.
6.2.1.1 THE STEP OF OPERATION
6.2.1 CUSTOMIZE THE AMOUNT OF ESPRESSO
(12) Press the Manual dose button ❶ ,
then the Manual dose button ❶ light will
blink blue light slowly, other two buttons
don’t light up.
(13) After a while, water will flow out.
When it flow out 150mL-200mL water,
the machine will stop automatically.
All 3 button’s light keep blue fixed when
the brewing is finished. Rotate the Es-
presso/Steam knob ⓭ back to off-position. Pour away the water on
the cup.
(14) Move the cup under the steam wand
⓯ .
(15) Rotate the steam control knob ⓭
to the steam function icon for 10 seco-
nds, there will be water coming out from
the steam wand ⓯ . Be careful of the
hot steam. Then rotate the Espresso/
Steam knob ⓭ back to off-position. Pour away the water of the cup.
