20
19
6.3.2 HOW TO CLEAN THE STEAM NOZZLE
Note: During the milk frothing, if there is suddenly a noise
from the machine or the steam become weak, please check
if there is enough water in the water tank ⓬ and add water
in time. When the water left the water tank⓬ is going to fi-
nish, it will produce a louder noise. After adding water, it will
operate as usual.
Note:(Please mind the hot water and operate carefully)
（2）Prepare a pitcher with about 100mL
of milk. We recommend to use whole
milk about 41-45℉. Take the pitcher with
the milk and insert steam wand ⓯ into the
milk.
（3）Rotate the espresso/steam knob ⓭
to steam position from the ready mode,
steam will come out from the steam w-
and ⓯.
（4）Three button’s light keep light fixed,
the appliance is in the frothing milk sta-
tus.
（5）Froth milk by moving vessel round
from up to down.
（6）After the milk increase in volume by
two times or your required purpose is
reached, you can turn the espresso/steam
knob ⓭ to off-position.
（7）Take away the pitcher. Your milk foam
is ready now.
（8）When you rotate the espresso/steam
knob ⓭ back to off-position, the pressure
relief hole ⓲ will make a loud noise. It is
because the machine is relieving the
pressure, which is normal and not a pr-
oblem.
am. Then rotate the Espresso/Steam knob ⓭ back to off-position. Pour
away the water of the cup.
