getAir easyFan, Руководство пользователя

Страница: 23 / 32

23
• Remove the inside cover from the
mounting tube.
• Unplug the connector from the fan.
• Without damaging the cable, pull out
the fan and heat exchanger at the
bracket.
• Check the condensate drain in the bend;
remove any condensate.
• Without damaging the cable, push
the heat exchanger carefully into the
mounting tube as far as it will go.
CAUTION
Risk of damage from blocked condensate drain!
Never push the units into the bend via the con-
densate drain.
• Without damaging the cable, insert the
fan carefully into mounting tube.
• Insert the fan connector and push the
fan carefully up to the heat exchanger in
the mounting tube.
• Insert the inside cover into the mount-
ing tube with the opening facing
upwards.
• Switch the system on again at the
control unit.
Special window reveal solution
• Unscrew the window reveal grille.
• Remove the prefilter from the window
reveal grille.
• Check the prefilter; clean or replace if
necessary.
• Reinsert the prefilter into window reveal
grille.
• Reinstall the window reveal grille.
INFORMATION
The window reveal grille fins must route the
airflow away from the building.
Special loft/cellar solution
• Switch off the system at the control
unit.