Getac Technology 8212X, Руководство пользователя

Страница: 114 / 144

Troubleshooting 8-5
You cannot eject a disc.
The disc is not properly seated in the drive. Manually release the disc
following the method described next:
1. Disconnect the drive from the computer.
2. Insert a small rod, such as a straightened paperclip, into the
drive’s manual eject hole and push firmly to release the tray.
3. Pull the tray out until fully extended, and then remove the disc.
Display Problems
Nothing appears on the screen.
During operation, the screen may automatically turn off as a result of
power management. Press any key to see if the screen comes back.
The brightness level might be too low. Increase brightness by
pressing the
Fn + F7
hot key.
The display output might be set to an external device. To switch the
display back to the LCD, press the
Fn
+
F5
hot key or change the
display through the
Display Settings
Properties.
The characters on the screen are dim.
Adjust the brightness and/or contrast.