DANGER
Sparks generated when charging the
equipment can cause an explosion.
Recharge the batteries of the Com box
and the data collector only outside the
explosion-risk area.
30
To charge the battery of the Com Box proceed as
follows:
Unplug the connecting cable of the measuring
probe from the jack (10) in the Com Box.
Align the marking on the plug of the USB power
cable (11) with the marking on the jack (10).
Insert the plug into the jack until it hits a stop.
Connect the USB power cable with the power
supply unit to the power supply.
During the charging process the LED on the USB
power cable is illuminated green. The LED of the
Com Box is pulsing green.
Once the battery of the Com Box is fully recharged
the LEDs on the USB power cable and on the Com
Box are no longer illuminated.
If the LED on the USB power cable is illuminated red
an error occurred during the charging process.
Disconnect the Com Box from the power supply.
Detach the USB power cable from the Com Box.
Re-connect the USB power cable with the Com
Box.
Re-connect the USB power cable with power
supply.
If a fault occurs that cannot be corrected, please
contact our Technical Service or authorized
agency in your country.
10
11
