The selection menu "Pressure rating" will be
shown.
Tap on the item indicating the desired pressure
rating.
If you do not want to enter a saturated steam
temperature, tap on item ??? . bar/??? °C.
The desired pressure rating will be saved. This
pressure will then be shown with the next test
measurement.
Perform the test as described on page 20.
To save the test result tap button "Save".
The display shows the test result and its storage
number. This storage number helps allocating the
test results later in the VKP 40plus PC program on
the computer.
Write down the storage number.
You can use the test measurement to create a new
test object or a test object with modified features. If
you want to create a new test object in the
VKP 40plus PC program you have to enter
additional information. If you data log important test
information, it will be easier to enter the test object
afterwards into the data base,
Note down all other essential details necessary
for creating a test object.
For a template go to
Program/Gestra/TRAPtest_VKP40/Doc and click on
the file DATA AQUISITON on your computer.
To complete the test measurement and return to
the main menu tap the button "Continue".
After the test is finished the test result is shown on
the display of the data collector. Below the
graphical representation the number of the test
measurement is shown. In the memory of the data
collector the test job "99999" is added to the list of
test jobs.
Evaluating the test results on a
computer
You can use your computer to evaluate and
interpret the test results. For this purpose the
supplied GESTRA program for VKP 40plus must be
installed on your computer. To upload the data to
your computer you have to connect the data
collector to the computer.
For more information see the operating
instructions for the software program for
VKP 40plus.
27
