33
If faults occur that are not listed above or cannot
be corrected, please contact our Technical
Service or authorized agency in your country.
Putting the equipment out of operation
Removing the equipment
Switch off the data collector and the Com box.
Detach the connecting cable of the measuring
probe from the jack in the Com box.
If necessary recharge the data collector and the
Com box.
Store the equipment as described on page 12.
Disposing of the equipment
The equipment is made from the following
materials:
Component part DIN / EN
Data collector
See operating instructions for
the data collector
Body of the
measuring probe
3.7035
Housing of the
Com Box
ABS (acrylonitrile butadiene
styrene)
Identification tags 1.4301
Transportation
case (hard case)
Aluminium / plywood / TCN
film / foamed plastic /
cardboard
Component part DIN / EN
Carrying bag
Nylon Cordura fabric Samoa
The equipment and its components contain
electronic parts that must be disposed of
separately.
Send the equipment with all components back
to the manufacturer.
For more information on the disposal of the data
collector see the operating manual for the data
collector.
