GESTRA NRS 1-40 Скачать руководство пользователя страница 5

Страница: 5 / 40

Important Notes

Danger

The terminal strip of the NRS 140 is live during operation.

This presents the danger of electric shock.

Cut off power supply before mounting or removing the terminal strips and the housing

cover.

Usage for the intended purpose

Use switching controller NRS 140 only in conjunction with GESTRA level electrodes NRG 1640,

NRG 1740, NRG 1940 or NRG 11140 for signalling lowwater level (min. alarm).

Safety note

The equipment must only be installed and commissioned by qualified and adequately trained

personnel.
Maintenance and retrofitting must only be performed by entrusted personnel who – through adequate

training – have achieved a recognised level of competence.

ATEX (Atmosphère Explosible)

According to the European Directive ATEX 2014/34/EU the equipment must not be used in potentially

explosive atmospheres.

Attention

The name plate specifies the technical features of the equipment.

Note that any piece of equipment without its specific name plate must neither be

commissioned nor operated.

Note on the Declaration of Conformity / Declaration by the Manufacturer

For details on the conformity of our equipment according to the European Directives see our

Declaration of Conformity or our Declaration of Manufacturer.

The current Declaration of Conformity / Declaration of Manufacturer are available in the Internet under

www.gestra.de Documents or can be requested from us.

Содержание NRS 1-40









































Результаты поиска

Содержание NRS 1-40

Отзывы:

Похожие инструкции для NRS 1-40

Бренды по названию

Популярные бренды

GESTRA NRS 1-40, Оригинальное руководство по установке

Результаты поиска

Содержание NRS 1-40

Отзывы:

Похожие инструкции для NRS 1-40

Бренды по названию

Популярные бренды