background image

31

NRG 16-51, NRG 17-51, NRG 19-51 - USA - Installation & Operating Manual - 

850692-00

Disposal

Dispose of level electrodes in accordance with statutory waste disposal provisions.

Returning decontaminated equipment

If products have come into contact with media that are hazardous to health, they 
must be drained and decontaminated before being returned to GESTRA AG.

The term ‘media’ can refer to solid, liquid or gaseous substances or mixtures, as well as 
radiation.
GESTRA AG can accept returned products only if accompanied by a completed and 
signed return note and also a completed and signed declaration of decontamination.

 

The return confirmation and declaration of decontamination must be attached to the 
outside of the return package, as processing will otherwise be impossible and the 
products will be returned to the sender at their expense.

Please proceed as follows:

1. 

Let GESTRA AG know about the return beforehand by e-mail or phone. 

2. 

Wait until you have received the return confirmation from GESTRA.

3. 

Fill out the return confirmation (including declaration of decontamination) and send it 
with the products to GESTRA AG.

UL components

The NRG 1...-51 level electrode is registered under XACN.E513189.

Содержание NRG 16-50

































Отзывы: