55
GB
10.2.2 Generation and Editing of Profile Lists
A profile lists file consists of a maximum of 10 profile lists with up to 224 profiles. This is the
actual control file of the processing tool. In a profile list file, the blind rivet-specific profiles
are summarized in the application-specific setting sequence. Generating a profile list file is
divided into the operating steps “Enter Profile List Data”, “Select Profiles”, “Determine Setting
Sequence” and “Save”.
Actuating the
-button in the area profile list calls up the profile list screen. Here,
at first the header area is active, where the data relating to the application are entered in each
relevant field. In addition, this is signaled by the depressed
-button. At least the
“Name” field must be completed to proceed with generating the profile list, illustration 11.
Illustration 11: Entering the data of the profile list
Then the
-button in the lower area of the mask is depressed, or click in the Profiles
field. Actuating the -button will open the dialogue to open the profile files to be filed in the profile list,
illustration 12. Here, the right hand side provides an overview of the relevant data of the profile. Using
double click, you can insert one or several highlighted profiles into the profiles window, illustration 13.
