Gesan DPR 100, Руководство пользователя

Страница: 70 / 80

RENTAL & SILENT ENERGY RENTAL GENSETS 4.3
69
Events log 1/50
Low oil pressure
Stop
12 Sep 2007, 08:25:46
“On 12 September at 08:25:46, 2007, the module detected that the oil pressure was below the minimum
value and has stopped the generator set. It is the first event of a total of 50 stored.
To pass from one event to another press the button .To exit the main screen press .

Viewing information:
The display order of the screens is the following:

Status screen

Instruments screen (engine, generator set and grid)

Alarms screen

ECU DTCs (only for engines with electronic control)

Events log

Programmer (if enabled)

About
You can move between the different screens by pressing the button . Once you have selected a
screen, the display will stay on it. After a period of inactivity, the display will change to the status screen.
In the instruments screen, the various values will be shown automatically without you having to
press any button. Alternatively, you can move among the various values by pressing or .
These deactivates the autoscroll and if no button is pressed it returns to the status screen. To reinstate the
autoscroll press or until the title of the instruments screen is shown.
If an alarm is activated while the instruments screen is displayed, the display will jump to the alarm
screen automatically.