background image

5

NEPTUNE 7 FA

1)

 Options / model variants

Original instructions

EN

          

CAUTION

• 

High pressure jets can be dangerous. Never direct the water 
jet at persons, pets, electrical equipment or the machine its-
elf.

• 

Be aware when cleaning delicate parts made of rubber, fa-
bric, etc. with the high pressure cleaner. Keep some distance 
between high pressure nozzle and surface in order to prevent 
the surface from damage.

• 

During operation of the cleaner, recoil forces are produced at 
the spraying device. It must therefore be held firmly in both 
hands.

• 

Wear goggles during operation.

• 

The operator and anyone in the immediate vicinity of the site 
of cleaning should take action to protect themselves from 
being struck by debris dislodged during operation. 

• 

Never use the machine in an environment where there could 
be a danger of explosion. 

• 

Risk of explosion – Do not use the cleaner to spray with flam-
mable liquids.

• 

It is not allowed to clean asbestos- containing surfaces with 
high pressure.

• 

Check that cleaning will not result in dangerous substances 
(e.g. asbestos, oil) being washed off and harming the envi-
ronment.

• 

Only use correct fuel as specified. Improper fuels can cause 
severe hazard.

• 

Ensure that any exhaust emissions are not in a vicinity of air 
intakes.

• 

Because of exhaust emissions, airborne dust and aerosols, 
use proper safety gear when necessary. 

• 

Do not operate the cleaner in inadequately ventilated rooms.

• 

Do not touch, cover or place hose or power cord over the 
chimney.

• 

Do not tie the trigger handle open.

• 

Do not use any unsafe work techniques.

• 

Do not use the high-pressure hose for lifting loads.

• 

Operate the cleaner in the intended upright position only.

• 

High pressure hoses and couplings are safety relevant. Only 
use parts recommended by your dealer.

Содержание NEPTUNE 7




























Отзывы: