14
NEPTUNE 7 FA
1)
Options / model variants
Original instructions
EN
0
1
2
3
4
A
B
5%
ca.
ca.
3%
5%
3%
1%
1%
1. Select desired detergent
(A) or (B) and amount by
turning the knob to desired
percentage.
2. Spray the object to be
cleaned.
3. Allow the cleaning agent to
work.
4. Turn off the cleaning agent
and spray until clean wa-
ter is comming out of the
lance.
5. Rinse off the object.
The percentage shown in the
illustration are only approximate
data.
For special applications such as
disinfection, the exact detergent
concentration has to be deter-
mined by using a graduated
measuring container. For water
outlet volume of the machine
see chapter 9.4 technical data.
The use of cleaning agents
while using the steam device
will show a lower percentage
and will result in a lower con-
centration.
4.5 Using
cleaning
agents
NOTE
•
Never allow cleaning agent to dry on the surface to be
cleaned. The surface may be damaged.
•
This machine shall only be used with cleaning chemicals
supplied or recommended by GERNI.
•
This machine will, when a cleaning agent has been chosen,
spray out the detergent on high- as well as low-pressure.
•
To lenghten the lifetime of the machine, make sure to flush
the system with clean water after using chamicals.
