17
NEPTUNE 7 FA
1)
Options / model variants
Original instructions
EN
5.2.3
Buildings and Equipment
Task
Accessories
Method
General surfaces
Metallic equipment
Foam injectors, foam
lances, standard
lances
Curved lances
Tank cleaning
head
Detergents
Intensive
J25 Multi
Combi Active
Alkafoam
Disinfectant
DES 3000
1. Apply thick foam over the surfaces to be cleaned.
Apply on dry surfaces. Apply from top to bottom on
vertical surfaces. Let the foam act for up to 30 min-
utes for the optimal effect.
2. Proceed with cleaning using the high pressure
lance. Use applicable accessories. Use high pres-
sure to dislodge large amounts of incrusted dirt or
grime. Use lower pressure and high water volume
in order to rapidly flush away loose dirt and rinse
surfaces.
3. Apply DES 3000 disinfectant once the surfaces are
perfectly clean.
Areas covered by amounts of loose dirt, such as ani-
mal remains in slaughterhouses, can be removed by
using high water flow to flush away the dirt to evacua-
tion pits or drains.
Tank cleaning heads can be used to clean barrels,
vats, mixing tanks etc. Cleaning heads may be hydrau-
lically or electrically powered and give the possibility for
automatic cleaning without a constant user.
Rusted or damag-
es surfaces prior
to treatment
Wet Sandblasting
equipment
1. Connect the sandblasting lance to the pressure
washer and place the suction tube in the sand.
2. Always wear protective equipment during sand-
blasting.
3. Spray the surfaces to be treated with the mix of
water and sand. Rust, paint etc will be stripped off.
These are merely several examples of cleaning tasks that can be solved by a pressure washer in as-
sociation with accessories and detergents. Each cleaning task is different. Please consult your local
dealer or representative in order to discuss the best solution for your own cleaning tasks.
