German pool SAC-109, Руководство пользователя

Страница: 21 / 64

P.21
Minimum space (in mm) to be left as shown
Installation Instructions
Outdoor Unit
- Do not install the outdoor unit near sources of heat,
steam or flammable gas.
- Do not install the unit in too windy or dusty places.
- Do not install the unit where people often pass. Select
a place where the air discharge and operating sound
level will not disturb the neighbours.
- Avoid installing the unit where it will be exposed to
direct sunlight. If necessary, use protections that do not
interfere with the air flow.
- Leave the spaces as shown in the diagram for the air
to circulate freely.
- Install the outdoor unit in a safe and solid place.
- If the outdoor unit is subject to vibration, place rubber
gaskets onto the feet of the unit.
Installation of the Indoor Unit
Before installation starts, decide on the position of
the indoor and outdoor units, taking into account the
minimum space required around the units.
To install, proceed as follows:
Installation of the Mounting Plate
1. By using a level, put the mounting plate in a perfect
square position vertically and horizontally;
2. Drill 32 mm deep holes in the wall to fix the plate;
3. Insert the plastic anchors into the hole;
4. Fix the mounting plate by using the provided tapping
screws;
5. Ensure the mounting plate is correctly fixed.
50
300
300
500
2000
500
Note
Install the indoor unit in the room to be air conditioning,
avoid installation in corridors or communal areas.
Install the indoor unit at a height of at least 2.5 m
from the ground.
Note
The shape of the mounting plate may be different
from the one above, but installation method is similar.