German pool SAC-109, Руководство пользователя

Страница: 12 / 64

P.12
Remote Control
FAN
Fan mode: no automatic fan speed. Preset as high, users can adjust between low, medium, and high fan
speed. The display shows the corresponding symbols.
Dehumidifying mode: mandatory automatic fan speed. No adjustment allowed. The display shows the
corresponding symbols.
Other modes: fan speed can be adjusted in this cycle: automatic-> low -> medium -> high -> automatic.
The display shows the corresponding symbols.
Turbo mode: dehumidifying (low), cool (high), heat (set fan speed), fan (high). The display is set to show
automatic fan speed.
Sleep mode: display shows automatic fan speed. The fan speed is mandatory at low speed.
SWING
With every press, the motor switches between swing and stop. When the air conditioner is switched on
again, it goes back to the last swing position.
every press, the motor switches between swing and stop. When the air conditioner is switched on again, it
goes back to the last swing position.
In the first use, the upper flap is preset as off. When the mode is switched, each mode memorises
the corresponding swing setting. When the mode is next switched on, the air conditioner delivers the
corresponding swing setting.
Vertical and horizontal swing: each press switches the motor’s swing direction and stops corresponding
swing mode. Under turbo mode, vertical and horizontal swings are activated and the display shows
corresponding symbols.
DISPLAY
Press this button to turn on or off the display on the air conditioner. The display is preset as on.
When setting the timer (before the timer is confirmed), the display is voided, and the button is disabled.
When switching on/off, switching between modes or timing on and off, the display is cleared. Others remain
the same.