German pool SAC-109, Руководство пользователя

Страница: 17 / 64

P.17
Operating Instructions
Timer Mode –Power On
Timer Mode – Power Off
To set up automatic power-off
The timed stop is programmed with the appliance on.
Press Timer button, set the time by pressing the up or
down key. Press the key a few more times until on the
display you can read the time which passes between
the programming and the timed stop.
Note
To cancel the set function, press the Timer button again.
In case of power cut, it is necessary to set Timer on again.
Note
The appliance is fitted with a Hot Start function, which delays startup for a few seconds to ensure an immediate
output of hot air.
In heating operation, the appliance can automatically activate a defrost cycle, which is essential to free the
condenser from an excessive deposit of frost. The defroshing process usually lasts 2-10 minutes, and fan stops
operation. After defrosting, it returns to heating mode automatically.
Important
Before activating the timer: Programme the working mode with the Mode key and the fan speed with the
Fan key. Switch the conditioner off using the On/Off key.
To set up automatic power on
To programme the time start, the appliance should be off.
Press Timer, set the temperature with the up or down key.
Press Timer again, set the time by pressing the key up or down.
Press the key more times till on the display you can read the time
which passes between the programming and the timed start.
Note
To cancel the set function, press the Timer button again.
In case of power cut, it is necessary to set Timer on again.