20
Vapodest 45s
5.1. Turn on apparatus
Always close the protection door before operating the distillation unit!
1. Turn on tap completely.
2. Turn on titrator
3. Start Vapodest by turning the mains switch on.
The display shows the number of the current software version and the actual
status.
In order to run an analysis you have to wait for about 5 minutes till the steam
generator has reached its operating pressure. All other functions are available
right away.
4. After the system is ready, the display shows the following message:
5. Now you can enter further system settings or start an already entered program.
Make sure to read the next chapter!
5 Turn on apparatus and operation
Warnung vor
einer Gefahrenstelle
Vapodest 45s
C. Gerhardt
Vapodest 45s
Version X.X
Vapodest 45s
Heating
Vapodest 45s
Standby