December 2014
Baby Fold Operator Manual
5
General Note
Below are some terms and concepts that help to better understand the operation
of the folder.
Fold package dimension
(a) longitudinal fold section
This is the length of the panel fan folded.
(b) cross fold section
this is the length of the panel cross folded
(c) Front panel with title block
(m) Margin
Area for eventual punching for archiving
(p) Panel
Total width (a + m)
Paper specification
The folder is designed to work with plain paper 18-20lbs (75-90 gsm) If the
quality paper is different from these specifications this leads a poor quality and
increases a folding jams.
All types of paper different from the common must not be folded.
Mylar or polyester film must not enter the folder as they can also cause jams and
damage to the folder itself.
Floor specification
The folder must be installed on a flat and hard floor not on a soft floor as carpet
or linoleum
Folder Version
The Baby Fold Off line folder is available for table installation or with stand for
floor installation
This configuration is available
without feet and must be placed
on a flat surface and the front feet
must be adjusted in order to
avoid loss of stability.
This configuration is available
with feet and must be placed on a
flat and hard floor with
adjustable rubber feed to provide
the necessary stability
a
b
m
p
C
