December 2014
Baby Fold Operator Manual
9
Fold long plots
To fold long plot introduce the copy and keep aligned the copy during the fold
process, when the folder reach the panels 19 will eject 2 times dimension of the
fan fold dimension and a second panel of 40mm, this will enable to purge the
first copy package and start again the fold process for another 20 panels
module. When copy is completed by hand perform panel 19 and 20
Jams removals
When a jam occurs inside the folder, the red LED is
lit on and the folder emit a sound alarm to alert the
operator that it’s necessary to release the folder from
jam before continue to fold
Before to perform the Automatic Eject Procedure, try to pull back the paper
manually from the bridge.
Automatic Eject Procedure
Press the arrow key for 5-10 seconds to get out the copy, the folding rolls will
actuate to eject the paper jammed.
If the Procedure above does not work it is necessary to perform the manual
procedure.
Warning
1. Most Users do not follow the quick guide reference and introduce plot lead
edge curled or not trimmed 90° degrees, damaged and or miss the plot feed
by pulling media back this may cause a difficult paper jam not clearable by
user and requires a engineer service call.
2. Automatic jam removal procedure instead to release folder from jam it can
increase jam. So users must turn off folder, try to pull out paper from
entrance if it not possible then it’s necessary a service call intervention.
