December 2014
Baby Fold Operator Manual
3
•
Do not obstruct the ventilation openings.
•
Never push objects of any kind into slots or openings on this equipment.
•
If any of the following conditions occur, switch off the power to the machine
immediately and disconnect the power cord from the electrical outlet. Call an
authorized local service representative to correct the problem.
−
The equipment emits an unusual noise or odour.
−
The power cord is damaged or frayed.
−
A wall panel circuit breaker, fuse, or other safety device has been tripped.
−
Liquid is spilled into the folder.
−
The equipment is exposed to water.
−
Any part of the equipment is damaged.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the
back of the machine as a plug-in device. To remove all electrical power from
the equipment, disconnect the power cable from the electrical outlet.
Operational Safety Information
To ensure the continued safe operation of your GERA equipment, follow these
safety guidelines at all times.
Do these:
•
Always connect equipment to a correctly grounded power outlet. If in doubt,
have the outlet checked by a qualified electrician.
•
This equipment must be connected to a protective grounded circuit. This
equipment is supplied with a plug that has a protective grounding pin. This
plug will only fit into a grounded electrical outlet. This is a safety feature.
To avoid risk of electric shock, contact your electrician to replace the
electrical outlet if you are unable to insert the plug into it. Never use a plug
that lacks a grounded connection terminal to connect the product to an
electrical outlet.
•
Always follow all warnings and instructions that are marked on or supplied
with the equipment.
•
Always exercise care when moving or relocating equipment. Please contact
your local support organization to arrange relocation of the product to a
location outside your building.
•
Always locate the equipment in an area that has adequate ventilation and room
for servicing. See the Install guide for minimum dimensions.
•
Always use materials and supplies specifically designed for your GERA
equipment. Use of unsuitable materials may result in poor performance.
•
Always unplug this equipment from the electrical outlet before cleaning.
Do not Do these:
•
Never use a plug that lacks a grounded connection terminal to connect the
product to an electrical outlet.
•
Never attempt any maintenance function that is not specifically described in
this documentation.
•
This equipment should not be placed in a built-in installation unless proper
ventilation is provided. Please contact your Authorized Local Dealer for further
information.
•
Never remove covers or guards that are fastened with screws. There are no
operator serviceable areas within these covers.
•
Never locate the equipment near a radiator or any other heat source.
•
Never push objects of any kind into the ventilation openings.
•
Never override or “cheat” any of the electrical or mechanical interlock devices.
•
Never operate the equipment if you notice unusual noises or odors. Disconnect
the power cord from the electrical outlet and contact your local Service
Provider immediately.
