16
Area setting
: Click the “Draw Area” button and then click around the area where you want to
set as the alarm area in the image on the left side (the alarm area should be a closed area).
Click the “Stop Draw” button to stop drawing. Click the “Clear” button to delete the alarm area.
Click t
he “Save” button to save the settings. To ensure the accuracy of temperature
measurement, it is recommended to set not more than two areas at the same time.
Emissivity
: Set the emissivity of the target. The emissivity of each object is different. Please
refer to
Distance:
The distance between the target and the camera.
Reflective:
If there is any object with high emissivity in the scene, set the reflective
temperature to correct the ambient temperature. The reflective temperature should be set the
same as the temperature of the high emissivity object.
4.
Click “Setting” to set the alarm rule.