6
IMPORTANT:
1. B
y default, the Administrator’s username is
admin
and cannot be modified.
2.
The camera has two sets of passwords: one is for Web interface and the other is
for the third-party platform connection via ONVIF, e.g. GV-VMS
. GV-IP Device Utility
is used to set the ONVIF password. When the first-time user uses GV-IP Device Utility to
set a password for the camera, the two sets of passwords are created simultaneously.
3. To change the password
for Web interface
, go to Config > Security > User ; see
“Modified User” in
5.6.1 User Configuration
. To change the password
for ONVIF
connection
, go Config > Network > Advnaced; see
5.5.4 ONVIF
.
4. If the first-time user accesses the camera
’s Web interface on the browser directly by
using the IP address found in GV-IP Device Utility, the following dialog box will apear.
If
“Activate Onvif User” is enabled, the ONVIF user can be activated simultanously for the
third-party platform connection via ONVIF, using the default username and set password set
above to connect.