At the 3 red dots, drill a hole slightly smaller than the plastic screw
anchors provided.
3
For the camera with an IR LED ring, follow the steps below to
secure the IR LED ring to the camera.
7
Insert the 3 plastic screw anchors in the drilled holes.
4
Secure the camera with the 3 hard ceiling mount screws provided.
5
For the camera that does not come with an IR LED ring, place the
camera cover (for hard ceiling mount) on top of the camera and
tighten the screws with the supplied torx wrench.
6
Continued on the reverse
A. Secure the safety lock to the camera. Then secure the
camera cover.
B. Place the IR LED ring on top of the camera and tighten
the screws with the torx wrench provided.
